Will It Fit My Motor
Will It Fit My Motor?
Both Lock-n-Haul® devices work on the same principle of a 4-point load locking system and our Instructions issued with the devices and online available Videos under the Services Tab, will show you how they fit up and can be optimised to fit your particular boat / outboard / transom configuration.
G2-2 Model
The Evinrude G2-2 Model is specifically designed for the G2 Series of Evinrude outboards and is a 'one size fits all' and our simple Instructions and Videos under the Services Tab assist you to see how they fit up to Evinrude sized G2 Series outboards.
If the outline in the instructions and or videos do not assist you sufficiently, email us pictures of your motor, transom configuration and arrangement and we'll try to help you figure it out. Attach pictures and text to 0437230629, OR email to [email protected]
Universal Model
IMPORTANT
The Lock-n-Haul® Universal model fits a large majority of outboards manufactured, despite the enormous array of brands, sizes, HP's and new model variations available every year, with the device fundamentally fitting up in the same way for all setups. With a patented 4-point inline load lock system locates two concave end points onto the lower motor mount flange bolt heads (where exposed) on the lower unit just above the cavitation plate and the two rounded ends locate into indent recesses of the outboard motor transom mounting frame, bolted onto the boats transom.
Because outboard motor manufacturers have so many different variations and configurations, the best policy is for you to check your particular motor setup and look at Technical Services (Installation & Mods) page under the Services Tab, which also outlines minor mods where needed to adapt to ensure you can be satisfied with your purchase.
Thre undermentioned features are needed in most instances to install the Lock-n-Haul® Universal onto your outboard motor.
1) Power outboard motor tilt system**
2) Accessible (lower motor mount) steering pivot flange bolt heads
3) Transom motor mount indents/concaves/cradle
** The Universal device can still be used effectively on non Power Trim and Tilt outboards using a ratchet strap or similar to squeeze the outboard in tight onto the flange bolt heads, to prevent any movement.